Haco - Tail Lift Parts

News from Haco

30-07-2010 - Haco further improves its manual control unit and introduces a modified version

Haco has further developed its manual control unit and modified it slightly so that the unit, in addition to serving as an alternative for the Dhollandia unit, will in the near future also be suitable as an alternative for the Mafelec manual control units with associated contact elements.

The 2-button manual control unit that is suitable for Dhollandia will be fitted with contact elements that are 100% interchangeable with the original elements.

The manual control unit is also available in a 3-button version.

The manual control unit has the following important characteristics:

-          strong magnet integrated into the design;

-          comes with free holder upon purchase of a complete manual control unit;

-          large pushbuttons;

-          metal mounting frame for the contact elements;

-          very strong and durable construction.

The gross price remains the same: €54.90 for the complete unit including holder.

The Haco manual control unit is therefore over 20% cheaper than the original.

Since the introduction in September 2009 of the Haco manual control unit that is suitable for Dhollandia, thousands of such units have been successfully sold inside as well as outside the Netherlands.

Over 20% cheaper

1-year guarantee

including magnet and free wall holder

30-07-2010 - haco introduces motors and pumps with star connection suitable for Zepro

After more than a full year of development effort, Haco is now introducing motors and pumps with a star (*) connection suitable for Zepro. These motors and pumps are of an extremely high quality and have been subjected to the most rigorous end-user tests. As a result, Haco can provide a full 2-year guarantee for these motors and pumps as well.

As you have come to expect from us, these motors and pumps are very competitively priced and significantly less expensive than the originals.

The 2 kW motor is available in a 12V as well as a 24V model. The pumps are available in 0.8cc, 1.2cc and 2.5cc versions.

Your price advantage: from 21% to 48%

31-03-2010 - Further expansion of Haco cylinder range as alternatives for Dautel and MBB-Palfinger

The Haco range of cylinders has been expanded further with 6 cylinder types suitable for Dautel and MBB-Palfinger. An alternative for the DLB 36 lifting cylinder and 4 lifting and closing cylinders for the DLB 47 have been developed in addition to a short Ø70 lifting cylinder suitable for the MBB-Palfinger. The Haco cylinders come with a full 2-year guarantee and the piston and plunger rods are made from inductively hardened steel with a >30 micron chrome layer. The new Haco cylinders are 15% to 25% less expensive than the originals.

The new cylinder types are available directly from stock.

31-03-2010 - Haco introduces its own starter solenoid for tail lifts

After one year of development efforts, Haco is now introducing 4 types of motor solenoids (12V and 24V) for the most popular types of tail lifts. These motor relays comply with the strictest requirements and use a silver alloy for the contact elements in the solenoid. In accordance with the relevant technical requirements, the relay is protected against voltages which are too low or too high and can deal with peak loads very effectively. The starter relay is also waterproof. Every starter relay has a Haco label specifying article number, continuous Amperage of the relay and 12V or 24V.

16-11-2009 - Haco develops alternative for the Bär foot switch

After six months in the pipeline, Haco can now offers an alternative for the Bär foot switch.

The design has been kept virtually identical, and as a result the foot switch is 100% compatible. Haco has used the original Schmersal switch for its Bär foot switch, with a 1.5-metre cable. The quality of the foot switch is exceptionally high, as you have come to expect from Haco. Besides the complete foot switch, Haco can also supply you with all the individual parts as well as a Schmersal switch with a 3.5-metre cable. The Haco foot switch is easily recognisable by the words “Haco Tail Lift Parts” on the top of the foot switch. The price will really surprise you. The complete Bär foot switch can be supplied for €79, making it 25% cheaper than the original.

4519510L Foot switch complete “H” 1500mm Bär original EUR 105.63

4519511L Foot switch complete “S” 1500mm Bär original EUR 105.63

4519510H Foot switch complete “H” 1500mm Haco EUR 79.00

4519511H Foot switch complete “S” 1500mm Haco EUR 79.00

Naturally, Haco will give you a full 1-year guarantee on the foot switch. Ask the internal sales department for further information, or take a look at our website: www.haco-parts.com

The prices do not include VAT or your personal discount.

16-11-2009 - Now also a Haco alternative for the Dautel foot switch

Haco bietet Ihnen nun auch eine passende Alternative zur Dautel Fußbedienung

Haco has now also developed a suitable alternative for the Dautel foot switch. The Haco alternative is 100% compatible and the design has been kept the same in order to avoid any problems during installation. The Haco foot switch is easily recognisable by the words “Haco Tail Lift Parts” on the foot switch. The Haco foot switch is supplied solely as a complete set with the Bernstein proximity switch with a 6-metre cable and three Duraseal cable connection elements. The Haco price is astonishing. Haco is offering its foot switch for €99, making it 28% cheaper than the original Dautel foot switch.

4507509L Foot switch complete “H” 6000mm Dautel original EUR133.10

4507510L Foot switch complete “S” 6000mm Dautel original EUR133.10

4507509H Foot switch complete “H” 6000mm Haco EUR 99.00

4507510H Foot switch complete “S” 6000mm Haco EUR 99.00

Naturally, Haco will give you a full 1-year guarantee on the foot switch. The foot switch is available from stock. Ask the internal sales department for further information, or take a look at our website: www.haco-parts.com

The prices do not include VAT or your personal discount.

04-09-2009 - Haco now has its own manual controls compatible with Dhollandia and Mafelec

Haco launches its own line of manual controls for tail lifts.

Now, for the new model of Dhollandia manual control with magnet, Haco has its own alternative. Design has been kept virtually identical and the contact elements are fully interchangeable. Haco has made a number of improvements over the original:

A new O-ring in the manual control, with subtle modifications to the housing to make the unit stronger and more waterproof.
Use of a white magnet instead of black magnet (not only stronger but more long-lasting)
Use of heavier industrial cable with longer lifetime.

The Haco manual control is easily recognised by its blue colour and by the Haco logo on the unit itself. Haco's manual control (4552783H) is priced over 20% lower than Dhollandia's origi- nal, and is available completely connected with cable for EUR 54.90 (as compared to ori- ginal unit's EUR 70).The manual control is in stock and shipping immediately, either with or without cable.

In response to demand from our clients, both at home and abroad, Haco has also developed an alternative for Mafelec manual controls.

As Mafelec dealer in the Benelux,we can now offer a Haco alternative for 2, 3 and 4-button controls. Our clients, especially our clients abroad, demanded an alternative, and now Haco can deliver that alternative, and as expected at prices 20% lower than the Mafelec controls.

Haco contacts are fully inter- changeable with Mafelec contacts. To make it even easier for you, you can download the connection diagrams for a number of different brands from our website (under "Services").With the right diagrams, wiring a Mafelec or Haco manual control to operate any tail lift is a snap. The 2, 3 and 4-button manual controls are shipping now from stock.

04-09-2009 - New Haco dust cover 70x70 to fit Dhollandia

Haco is now shipping from stock our new standard and completely redesigned 70x70 dust cover to fit Dhollandia.

We have made a number of significant improvements:

Our dust cover contains additives to make it ozone and UV-resistant
Manufactured from a higher-quality rubber for better protection from oil.
Higher-quality rubber also improves strength and less prone to tearing

The Haco dust cover 70x70 (1051029H) is now shipping from stock at the very competitive price you have come to expect from us.

1051029L Dust cover Dhollandia 70x70 : EUR 18.50

1051029H Dust cover Haco 70x70 : EUR 14.90

Prices not including VAT or your personal discount

22-07-2009 - Haco now also has its own hydraulic pumps

Haco has now brought its own hydraulic pumps onto the market. Since two weeks we have been supplying our pumps directly from stock. The pumps are of the highest quality and every pump is thoroughly tested in terms of performance and durability during and after the production process. Haco gives a two-year full guarantee on all its pumps.

With 5 models and more than 20 variants, we offer a complete range suitable for almost all tail lifts of Dhollandia, Ama, Zepro, Dautel, Bär, Soerensen, MBB and Mariba.

And our price? As you would expect from us, our prices are 15 to 35% cheaper than the lowest OEM/Tail Lift market price. Your savings can therefore amount to over 60% if you currently buy your pumps from your tail lift producer. And, naturally, you also get your discount on our gross prices. You can also come to us for Haldex, Smith and Bosch pumps at competitive prices.

Haco Tail Lift Parts will continue to surprise you, now and in the future.

2-year full guarantee

Discounts can reach over 60%

More than 20 variants are available from stock

For further information, call our internal sales department or take a look at our website under the product group “motors and pumps” and the sub-group “pumps”.

18-05-2009 - Haco Tail Lift Parts launches new website

Haco Tail Lift Parts has launched a new website. The new site has not only been redesigned in accordance with the new house style but has also been improved in many ways in terms of functionality.

We are working hard to make it as easy and transparent as possible for our clients to work with our system. To realise this, we will gradually be introducing a new article structure and coding system in the course of this year. The new article structure will be completely transparent for the client in terms of what is being purchased. For example, a clear differentiation is made between original parts from tail lift suppliers, OEM parts and Haco parts.

The new structure will allow you to easily see whether an alternative is available for a specific product and what you would be saving should you choose the alternative. As our client, the choice is always up to you.

The extensive search functionality has also been significantly improved, and you can now search on the basis of several criteria simultaneously in order to find the appropriate product as quickly as possible.

If you would like to discover how the new system works, you can, for example, try out the new and improved functionality by searching for a common cylinder type.

To implement the new article structure, more than 10,000 articles must be created and entered into the system. Thousands of new photographs of products must also be made and entered. This obviously entails a great deal of work, and the transition process will therefore be a gradual one and continue until the fall of 2009.

The new website is available in Dutch, German and English. In the near future, the languages available will be expanded to include French, Turkish, Russian and Polish.

In 2010, we plan to launch a new webshop with a wide range of functionalities. We will regularly update you on our progress in this regard.

If you have any questions about the new website, please feel free to call our office.

www.haco-parts.com

01-05-2009 - Haco Tail Lift Parts discontinues its tail lift repair service

After 23 years, Haco Tail Parts is discontinuing its tail lift repair and maintenance activities and will focus solely on its activities as a wholesaler and supplier.

Over the last 10 years, Haco has increasingly focused on its wholesaler and supplier activities and has grown to become one of the leading suppliers of tail lift parts in Europe. Even in the present market conditions, it is still steadily increasing its market share. This strong growth and the greater emphasis on the international component of its commercial activities require an increased focus and commitment from all its employees.

We have already informed our clients of this decision several weeks ago, and an appropriate and professional solution has been found for all of them in their direct surroundings. This also ensures that future repairs will be carried out with Haco parts.

If you have any questions, please feel free to call our office.